View PDTD123EK_1294901.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PDTD123E series
NPN 500 mA, 50 V resistor-equipped transistors; R1 = 2.2 k, R2 = 2.2 k
Rev. 01 -- 8 April 2005 Product data sheet
1. Product profile
1.1 General description
500 mA NPN Resistor-Equipped Transistors (RET) family.
Table 1: Product overview Package Philips PDTD123EK PDTD123ES [1] PDTD123ET
[1]
Type number
PNP complement JEITA SC-59A SC-43A JEDEC TO-236 TO-92 TO-236AB PDTB123EK PDTB123ES PDTB123ET
SOT346 SOT54 SOT23
Also available in SOT54A and SOT54 variant packages (see Section 2).
1.2 Features
s Built-in bias resistors s Simplifies circuit design s 500 mA output current capability s Reduces component count s Reduces pick and place costs s 10 % resistor ratio tolerance
1.3 Applications
s Digital application in automotive and industrial segments s Controlling IC inputs s Cost saving alternative for BC817 series in digital applications s Switching loads
1.4 Quick reference data
Table 2: Symbol VCEO IO R1 R2/R1 Quick reference data Parameter collector-emitter voltage output current (DC) bias resistor 1 (input) bias resistor ratio Conditions open base Min 1.54 0.9 Typ 2.2 1.0 Max 50 500 2.86 1.1 Unit V mA k
Philips Semiconductors
PDTD123E series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 k, R2 = 2.2 k
2. Pinning information
Table 3: Pin SOT54 1 2 3 input (base) output (collector) GND (emitter)
R1
Pinning Description Simplified outline Symbol
2 1 2 3
001aab347 006aaa145
1
R2
3
SOT54A 1 2 3 input (base) output (collector) GND (emitter)
R1
2 1 2 3
001aab348 006aaa145
1
R2
3
SOT54 variant 1 2 3 input (base) output (collector) GND (emitter)
R1
2 1 2 3
001aab447 006aaa145
1
R2
3
SOT23, SOT346 1 2 3 input (base) GND (emitter) output (collector)
1 2
006aaa144 sym007
3
R1
3 1
R2
2
9397 750 14582
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 -- 8 April 2005
2 of 10
Philips Semiconductors
PDTD123E series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 k, R2 = 2.2 k
3. Ordering information
Table 4: Ordering information Package Name PDTD123EK PDTD123ES [1] PDTD123ET
[1]
Type number
Description plastic surface mounted package; 3 leads
Version SOT346
SC-59A SC-43A -
plastic single-ended leaded (through hole) package; SOT54 3 leads plastic surface mounted package; 3 leads SOT23
Also available in SOT54A and SOT54 variant packages (see Section 2 and Section 9).
4. Marking
Table 5: Marking codes Marking code [1] E3 D123ES *7T Type number PDTD123EK PDTD123ES PDTD123ET
[1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China
5. Limiting values
Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VCBO VCEO VEBO VI Parameter collector-base voltage collector-emitter voltage emitter-base voltage input voltage positive negative IO Ptot output current (DC) total power dissipation SOT346 SOT54 SOT23 Tstg Tj Tamb
[1]
Conditions open emitter open base open collector
Min -
Max 50 50 10 +12 -10 500 250 500 250 +150 150 +150
Unit V V V V V mA mW mW mW C C C
Tamb 25 C
[1]
-65 -65
storage temperature junction temperature ambient temperature
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint.
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
9397 750 14582
Product data sheet
Rev. 01 -- 8 April 2005
3 of 10
Philips Semiconductors
PDTD123E series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 k, R2 = 2.2 k
6. Thermal characteristics
Table 7: Symbol Rth(j-a) Thermal characteristics Parameter thermal resistance from junction to ambient SOT346 SOT54 SOT23
[1]
Conditions in free air
[1]
Min
Typ
Max
Unit
-
-
500 250 500
K/W K/W K/W
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
7. Characteristics
Table 8: Characteristics Tamb = 25 C unless otherwise specified. Symbol ICBO ICEO IEBO hFE VCEsat VI(off) VI(on) R1 R2/R1 Cc Parameter Conditions Min 40 0.6 1.0 1.54 0.9 Typ 1.1 1.5 2.2 1.0 7 Max 100 100 0.5 2 0.3 1.8 2.0 2.86 1.1 pF V V V k Unit nA nA A mA collector-base cut-off VCB = 40 V; IE = 0 A current VCB = 50 V; IE = 0 A collector-emitter cut-off current emitter-base cut-off current DC current gain collector-emitter saturation voltage off-state input voltage on-state input voltage bias resistor 1 (input) bias resistor ratio collector capacitance VCB = 10 V; IE = ie = 0 A; f = 100 MHz VCE = 50 V; IB = 0 A VEB = 5 V; IC = 0 A VCE = 5 V; IC = 50 mA IC = 50 mA; IB = 2.5 mA VCE = 5 V; IC = 100 A VCE = 0.3 V; IC = 20 mA
9397 750 14582
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 -- 8 April 2005
4 of 10
Philips Semiconductors
PDTD123E series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 k, R2 = 2.2 k
103 hFE 102
006aaa318
(1) (2) (3)
10-1
006aaa319
VCEsat (V)
10
(1) (2) (3)
1
10-1 10-1
1
10
102 IC (mA)
103
10-2 1 10 IC (mA)
102
VCE = 5 V (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -40 C
IC/IB = 20 (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -40 C
Fig 1. DC current gain as a function of collector current; typical values
10
006aaa320
Fig 2. Collector-emitter saturation voltage as a function of collector current; typical values
10
006aaa321
VI(on) (V)
(1)
VI(off) (V)
(1)
1
(2) (3)
1
(2) (3)
10-1 10-1
1
10
102 IC (mA)
103
10-1 10-1
1 IC (mA)
10
VCE = 0.3 V (1) Tamb = -40 C (2) Tamb = 25 C (3) Tamb = 100 C
VCE = 5 V (1) Tamb = -40 C (2) Tamb = 25 C (3) Tamb = 100 C
Fig 3. On-state input voltage as a function of collector current; typical values
Fig 4. Off-state input voltage as a function of collector current; typical values
9397 750 14582
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 -- 8 April 2005
5 of 10
Philips Semiconductors
PDTD123E series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 k, R2 = 2.2 k
8. Package outline
3.1 2.7 3 0.6 0.2
1.3 1.0 4.2 3.6 0.45 0.38
3.0 1.7 2.5 1.3 4.8 4.4 1 2 0.50 0.35 0.26 0.10 04-11-11 5.2 5.0 Dimensions in mm 14.5 12.7
0.48 0.40 1 2 2.54 3 1.27
1.9 Dimensions in mm
04-11-16
Fig 5. Package outline SOT346 (SC-59A/TO-236)
Fig 6. Package outline SOT54 (SC-43A/TO-92)
0.45 0.38 4.2 3.6 1.27
4.2 3.6
0.45 0.38 0.48 0.40 1
3 max
2.5 max 1
0.48 0.40 2 2.54 3 1.27
4.8 4.4
2 5.08 2.54 3 5.2 5.0 14.5 12.7 04-06-28 5.2 5.0 Dimensions in mm 14.5 12.7 4.8 4.4
Dimensions in mm
05-01-10
Fig 7. Package outline SOT54A
Fig 8. Package outline SOT54 variant
3.0 2.8
3
1.1 0.9
0.45 0.15 2.5 1.4 2.1 1.2
1
2
1.9 Dimensions in mm
0.48 0.38
0.15 0.09 04-11-04
Fig 9. Package outline SOT23 (TO-236AB)
9397 750 14582 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 -- 8 April 2005
6 of 10
Philips Semiconductors
PDTD123E series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 k, R2 = 2.2 k
9. Packing information
Table 9: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number PDTD123EK PDTD123ES Package SOT346 SOT54 SOT54A SOT54 variant PDTD123ET
[1]
Description 4 mm pitch, 8 mm tape and reel bulk, straight leads tape and reel, wide pitch tape ammopack, wide pitch bulk, delta pinning 4 mm pitch, 8 mm tape and reel
Packing quantity 3000 -115 -215 5000 -412 -112 10000 -135 -116 -126 -235
SOT23
For further information and the availability of packing methods, see Section 14.
9397 750 14582
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 -- 8 April 2005
7 of 10
Philips Semiconductors
PDTD123E series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 k, R2 = 2.2 k
10. Revision history
Table 10: Revision history Release date 20050408 Data sheet status Product data sheet Change notice Doc. number 9397 750 14582 Supersedes Document ID PDTD123E_SER_1
9397 750 14582
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 -- 8 April 2005
8 of 10
Philips Semiconductors
PDTD123E series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 k, R2 = 2.2 k
11. Data sheet status
Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
III
Product data
Production
[1] [2] [3]
Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
12. Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
13. Disclaimers
Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
14. Contact information
For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
9397 750 14582
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 -- 8 April 2005
9 of 10
Philips Semiconductors
PDTD123E series
NPN 500 mA resistor-equipped transistors; R1 = 2.2 k, R2 = 2.2 k
15. Contents
1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information. . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 3 3 3 4 4 6 7 8 9 9 9 9
(c) Koninklijke Philips Electronics N.V. 2005
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 8 April 2005 Document number: 9397 750 14582
Published in The Netherlands

▲Up To Search▲

Price & Availability of PDTD123EK

	To Download PDTD123EK Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .